lathing

listen to the pronunciation of lathing
Türkçe - Türkçe

lathing teriminin Türkçe Türkçe sözlükte anlamı

LATH
(Osmanlı Dönemi) El ayasıyla vurmak
İngilizce - İngilizce
{n} a fitting up with laths, an invitation
The act or process of covering with laths; laths, collectively; a covering of laths
{i} act of applying laths; covering made of strips of wood
present participle of lathe
lathe
An administrative division of the county of Kent, in England, from the Anglo-Saxon period until it fell entirely out of use in the early twentieth century
lath
{n} a narrow slip of wood to support plaster or tiles
lath
{v} to cover or line with laths
lathe
{n} a turner's tool, a division of country
lath
Thin, narrow strips of rough wood ordinarily nailed to studs and joists of walls and ceilings as a backing for plaster Snow fence lath is similar but thicker and wider
lath
A thin white strip that marks the boundary of a water jump It's lined with plasticine to show whether a horse's hoof touched it
lath
wire mesh or narrow strip of wood, as in: The historical house featured walls of lath and plaster
lath
A wood strip or metal mesh, which acts as a background or reinforcing agent for the scratch coat or mortar coat
lath
{f} cover with strips of wood; line with laths
lath
Ripe vine shoot
lath
A thin, narrow strip of wood, nailed to the rafters, studs, or floor beams of a building, for the purpose of supporting the tiles, plastering, etc. A corrugated metallic strip or plate is sometimes used
lath
A thin white strip marks the boundary of a water jump Plasticine lines it to show whether a horse's hoof touched it
lath
Thin narrow strips of wood used as a base for plaster in lath-and-plaster walls
lath
a long flat narrow piece of wood used in building to support plaster (=material used to cover walls)
lath
{i} thin flat strip of wood; group of thin strips of wood
lath
Mesh metal, plasterboard, or thin wooden strips used as a foundation for plaster or stucco
lath
A thin, narrow strip of wood, nailed to the rafters, studs, or floor beams of a building, for the purpose of supporting the tiles, plastering, etc
lath
A building material of narrow wood, metal, gypsum, or insulating board that is fastened to the frame of a building to act as a base for plaster, shingles, or tiles
lath
House - A sun-shade structure that may be constructed with lattice material, for horticultural and similar uses
lath
A building material of wood, metal, gypsum, or insulating board that is fastened to the frame of a building to act as a plaster base
lath
A corrugated metallic strip or plate is sometimes used
lath
a narrow thin strip of wood used as backing for plaster or to make latticework
lath
A building material of wood, metal, gypsum, or insulating board, fastened to frame of building to act as a plaster base
lathe
Machine for shaping turned parts by application of cutting edges against the revolving wood
lathe
{f} cut (wood, metal, etc.) with a lathe
lathe
n machine that cuts a rotating part with a nominally statinary tool The tool is moved linearly in two dimensions while the part rotates but does not move back or forth
lathe
{i} tool which is used to cut and shape (wood, metal, etc.)
lathe
A lathe is a machine which is used for shaping wood or metal. To cut or shape on a lathe. a machine that shapes wood or metal, by turning it around and around against a sharp tool (Probably from lath (14-15 centuries), perhaps from lad). Machine tool that performs turning operations in which unwanted material is removed from a workpiece rotated against a cutting tool. Lathes are among the oldest and most important machine tools, used in France from 1569 and important in the Industrial Revolution in England, when they were adapted for metal cutting (see Henry Maudslay). Lathes (usually called engine lathes) today have a power-driven, variable-speed horizontal spindle to which the workholding device is attached. Operations include turning straight or tapered cylindrical shapes, grooves, shoulders, and screw threads and facing flat surfaces on the ends of cylindrical parts. Internal cylindrical operations include most of the common hole-machining operations, such as drilling, boring, reaming, counterboring, countersinking, and threading with a single-point tool or tap. See also boring machine
lathe
A lathes is a machine which holds a piece of wood or metal between two centers and turns it so the work can be shaped by hand-held "turning chisels " Foot operated or hand cranked
lathe
woodworking machine, as in: He shaped the legs for the chair on his lathe
lathe
A machine used for shaping an article
lathe
A machine for turning, that is, for shaping articles of wood, metal, or other material, by causing them to revolve while acted upon by a cutting tool
lathe
To shape with a lathe
lathe
The movable swing frame of a loom, carrying the reed for separating the warp threads and beating up the weft; called also lay and batten
lathe
A device that turns glass tubes at a consistent rate so that large pieces can be easily formed into other shapes The use of a lathe frees the hands so that tools can be more efficiently utilized
lathe
A machine that works a piece of material such as wood or metal against a tool by rotating it
lathe
A lathe object is created by rotating a two-dimensional shape around a central axis It is convenient for creating 3D objects like glasses, vases, and bowls
lathe
A tool, usually free standing, for turning a piece while tools are held against it Typically several feet long and about a foot wide Different lathes are used for wood or metal (or glass) pieces A lathe commonly has a headstock that grips the piece and has gears and a motor drive for turning the piece and a tailstock that guides the other end of long pieces Most lathes allow working a piece held only at the headstock, as for making bowl shaped pieces The tailstock is normally mounted on rails (the bed) so it can be moved accurately to different distances while remaining centered on the headstock A wood lathe will have a tool rest to help guide the handheld tools along the piece while a metal lathe will have a solid tool holder with screw adjustments to withstand the increased force Glass lathes are used to join medium and large diameter tubing for scientific glass work, keeping two tubes aligned as heat is applied all around the joint rev 2003-02-27
lathe
A granary; a barn
lathe
A machine tool used to shape a piece of material, or workpiece, by rotating the workpiece against a cutting tool
lathe
At present it consists of four or five hundreds, and is confined to the county of Kent
lathe
machine tool for shaping metal or wood; the workpiece turns about a horizontal axis against a fixed tool
lathe
A machine on which logs are peeled to yield vencer for plywood
lathe
A turning machine capable of producing round diameters by rotating a workpiece against a stationery single-point cutting tool
lathe
Another tool that can do more than just its basic function The Lathe tool lets you "sweep" a 2D template polygon around an axis to create a 3D object that is symmetrical around that axis, as if you'd created it on a machine lathe You can also cause the object to spiral as you go, or to taper in size
lathe
Formerly, a part or division of a county among the Anglo-Saxons
lathe
A machine designed to center a piece of wood on an axis: as it turns, the woodturner can cut into the wood to create symmetrical objects
lathe
A machine that is used for working metals and plastics by rotating about the horizontal axis against a tool that shapes it
lathing